Care & Maintenance
Angled Transmission
Annex
Annex
No part of this publication may be duplicated or edited in any form or by any means, including any type of electronic or mechanical method without prior written permission from ShowTex.
ShowTex and its employees are fully aware of their task to provide a reliable edition of this document. Nevertheless, they cannot accept any form of liability for the direct or indirect consequences of imperfections that might remain in this edition. The material in this manual is subject to change without notice.
ShowTex warrants that its mechanical and technical products, when delivered in new condition, in original packing, sold directly and used in normal conditions are free from any defects in manufacturing, materials and workmanship. For more information about your local warranty terms, please check our website or contact your local ShowTex office.
All products from the ShowTex Rental range are supposed to be returned in the same state as they were rented. Please treat our products with care, allowing the next user to enjoy the products as much as you did. The rented products are internally checked according to the general rental conditions. Be sure to check our rental guidelines on our website before installing and using this product: ShowTex rental guidelines
Read and understand this user manual before installing and or operating the system. Failure to follow the instructions in this document could result in serious injury!
Following the guidelines of this manual will reduce the risk of damaging the equipment or injuring yourself and the people around you. Nevertheless, ShowTex cannot be held accountable for any use or misuse of the equipment and supplies.
Damage to the system caused by any other method of installation than the one shown in this manual can only be repaired or fixed at the customer’s expense.
As a result of the above warning, any ShowTex product must be installed and operated by a qualified technician who knows its capabilities as well as its limitations.
In case you are uncertain about the eligibility of any hardware in your product, please get in touch with your local ShowTex office to receive additional guidance.
Thank you for choosing for ShowTex and purchasing one of our products. We want to ensure that your experience is as smooth and safe as possible, so we kindly request that you take a few moments to carefully read this manual before installing your new system.
This manual contains important information that will help you comply with health and safety regulations, as well as provide guidance on how to safely install, operate and maintain your product. Our team has taken great care to ensure that this manual is easy to understand and follow, using straightforward language and clear illustrations.
If you have any questions or concerns regarding the installation or use of your product, please feel free to contact your local ShowTex office. Our knowledgeable team members are always available to assist you and answer any questions you may have.
Periodic, regularly scheduled maintenance inspections are necessary as the HiSpeed RollUp has components that must be inspected, adjusted, maintained and replaced. To ensure the safety and proper functioning of the system, it is essential to establish a routine inspection.
Please follow the provided schedule below as the minimum maintenance program. After the operating personnel gains experience with the system within the initial year, additional measures and adjustments may be implemented based on your systems specific needs.
| Every week | Every month | Every year | |
|---|---|---|---|
| Operate the HiSpeed RollUp. | X | ||
| Listen for unusual noise coming from the motor. | X | ||
| Listen for unusual noise coming from the bearings of the Truss Roller. | X | ||
| Listen for unusual noise coming from the Angled Transmission. | X | ||
| Inspect if the HiSpeed RollUp is operating smoothly and there are no unusual movements. | X | ||
| Inspect the condition of the screen or fabric on the HiSpeed RollUp when unrolled. | X | ||
| In case of a Venetia or Roman Blind setup, inspect the condition of the RibCord. | X | ||
| Inspect whether all Pins with safety Nuts or Safety Clips are securely in place. | X | ||
| Inspect if all rigging points are securely attached. | X | ||
| Inspect whether the HiSpeed RollUp remains properly rigged and level. | X | ||
| Inspect whether the weighted bar at the bottom of the screen or fabric remains securely in place. | X | ||
| Inspect if the screen or fabric stops at the correct (end) position(s). | X | ||
| Inspect whether the Coupling End Cap is in place. | X | ||
| Inspect whether the safety covers of the Angled Transmission are in place. | X | ||
| Remove the safety cover from the Angled Transmission and inspect if the gears need additional grease. | X |
To effectively maintain your HiSpeed Angled Transmission, it is
recommended to regularly use it as it helps distribute the grease
evenly. Instances of above-average use or operating the curtain in
surroundings with high humidity, dust or extreme temperature changes may
require shorter intervals than indicated in the Care & Maintenance.
Contact your local ShowTex branch to obtain the correct grease
specifications.
For more technical assistance, please contact your local ShowTex
office.
The address and contact information can be found on our website:
www.showtex.com