Care & Maintenance
AutoReveal 300
Annex
Annex
No part of this publication may be duplicated or edited in any form or by any means, including any type of electronic or mechanical method without prior written permission from ShowTex.
ShowTex and its employees are fully aware of their task to provide a reliable edition of this document. Nevertheless, they cannot accept any form of liability for the direct or indirect consequences of imperfections that might remain in this edition. The material in this manual is subject to change without notice.
ShowTex warrants that its mechanical and technical products, when delivered in new condition, in original packing, sold directly and used in normal conditions are free from any defects in manufacturing, materials and workmanship. For more information about your local warranty terms, please check our website or contact your local ShowTex office.
All products from the ShowTex Rental range are supposed to be returned in the same state as they were rented. Please treat our products with care, allowing the next user to enjoy the products as much as you did. The rented products are internally checked according to the general rental conditions. Be sure to check our rental guidelines on our website before installing and using this product: ShowTex rental guidelines
Read and understand this user manual before installing and or operating the system. Failure to follow the instructions in this document could result in serious injury!
Following the guidelines of this manual will reduce the risk of damaging the equipment or injuring yourself and the people around you. Nevertheless, ShowTex cannot be held accountable for any use or misuse of the equipment and supplies.
Damage to the system caused by any other method of installation than the one shown in this manual can only be repaired or fixed at the customer’s expense.
As a result of the above warning, any ShowTex product must be installed and operated by a qualified technician who knows its capabilities as well as its limitations.
In case you are uncertain about the eligibility of any hardware in your product, please get in touch with your local ShowTex office to receive additional guidance.
Thank you for choosing for ShowTex and purchasing one of our products. We want to ensure that your experience is as smooth and safe as possible, so we kindly request that you take a few moments to carefully read this manual before installing your new system.
This manual contains important information that will help you comply with health and safety regulations, as well as provide guidance on how to safely install, operate and maintain your product. Our team has taken great care to ensure that this manual is easy to understand and follow, using straightforward language and clear illustrations.
If you have any questions or concerns regarding the installation or use of your product, please feel free to contact your local ShowTex office. Our knowledgeable team members are always available to assist you and answer any questions you may have.
Periodic, regularly scheduled maintenance inspections are necessary for any mechanical system. An automatic reveal system is no different. It has components that must be inspected, adjusted, maintained and replaced. To ensure the safety and proper functioning of the system, it is essential to establish a routine inspection.
The disassembly process should be conducted under the same conditions and by following the same steps as the assembly procedure.
To effectively maintain your automatic reveal system, it is recommended to regularly use it as it helps distribute the grease evenly. Instances of above-average use or operating the automatic reveal system in surroundings with high humidity, dust or extreme temperature changes may require shorter intervals.
| Every week | Every 6 months | |
|---|---|---|
| Operate the AutoReveal 300. | X | |
| Inspect the condition and functioning of the remote. | X | |
| Inspect whether the AutoReveal 300 is operating smoothly. | X | |
| Listen for unusual noise at level of the motor. | X | |
| Listen for unusual noise at level of the bearing. | X | |
| Inspect whether the limit switches function properly. | X | |
| Inspect the condition of all plugs and cables. | X | |
| Inspect the condition of the lock system of all plugs. | X | |
| If RF controllable, inspect if the RF remote and receiver function properly. | X | |
| Inspect the condition of the fabric. | X | |
| Inspect the condition of the Hook and Loop fastener on the tube. | X | |
| Inspect the condition of the Hook and Loop fastener on the fabric. | X | |
| Inspect the condition of the locks on the front lid and top lid. | X |
For more technical assistance, please contact your local ShowTex
office.
The address and contact information can be found on our website:
www.showtex.com