Skip to main content

ShowTex

Amazing Stage Fabrics in Motion

Screen Care & Maintenance

Buyer's Guide Screens

This article is part of our series: Projection Screen Buyer Guides.

Please follow the guidelines below carefully. This way you will enjoy your screen problem-free for a long time.

FIRST TIME USE

Your screen has been manufactured with the greatest care. If you do notice any irregularities during unpacking, please contact us immediately before you start the installation.

Ideally, a screen should be rolled on a round tube that is long enough. Alternatively, if you wish to lower the shipping cost of screens, ShowTex can ship welded screens in a packaging box, always carefully folded.

PVC screens can harden in a cold environment and soften in a warm one. Installation should always happen in an area with a steady temperature of about 18 degrees Celsius.

The screen must acclimatised before unfolding. Unfolding an unacclimatised screen can lead to permanent damage such as folds or cracks. This damage can affect the quality of the projection.

 

FRONTSIDE OF A SCREEN

Unless stated differently, all screens are hung up with the matt side facing the public.

 

PREPARATION

During installation, always work on a clean, flat and empty floor. It is advised to place a plastic sheet on the floor to protect your screen during installation. Avoid walking over the screen at all times. When you start unfolding your screen, ensure you do not need to reposition. Dragging the screen along the floor can cause scratches.

The screen can be cleaned with tepid water and a gentle detergent. Hard stains can, only on rare occasions, locally be treated with an alcohol-based mixture. Always first test in a corner or on a sample piece! (depending on the product this can cause discolouration). Afterwards, rinse with plenty of water.

The screen should always be properly wrapped during transport to avoid any damage. Never tip the flight case!

 

USING GLUE ON THE SCREEN

Most projection screens are made from PVC. This is a thermoplastic containing a hard material as its base product. To make the screen flexible, plasticizers are being added. This is important to know in case you want to stick different materials onto the screen. Some types of glue can react to these plasticizers. Even a perfect adhesive, at first glance, can dissolve after 48 hours. Please test in advance. Have a great Show!